eFlo 2.0 Standard
eFlo 2.0 Standard gas flow measurement and control up to 350 mbar
Measures and controls the flow of common process gases up to 350 mbar, with pressure and temperature compensation and calibration that can be certified in place.
eFlo 2.0 HiPr
Flow meters
eFlo 2.0 HiPr gas and liquid flow measurement and control up to 6 bar
DesignationeFlo 2.0 HiPr
Measures and controls the flow of standard and aggressive liquids and gases at pressures up to 6 bar, and its calibration can be certified in place.
- Available with an electronic valve or without a control valve
- Digital display with an easy to use touch pad
- Precision flow measurement of liquids and high pressure gases
- Direct and remote setpoint control
- Works with FlowMeter View software
- Easy retrofit of existing flow measurement equipment
- Flow calibration certifiable in use to CQI-9 requirements
- SCADA integration: current flow, totalised flow, setpoint and cost calculation
- Built-in high and low flow alarms
- Flow totalising
- Analogue control and feedback for data acquisition
- Integrated Modbus communications over RS485
- LED indicators: process data, high and low alarm, auto/manual, open/closed, motor drive
- Touch keypad: totaliser, reset, setpoint, auto/manual, configuration
- USB configuration and Ethernet connectivity
- Mobile friendly configuration interface
- Power required24 V DC at 400 mA
- Accuracy±4%
- Turndown ratio6:1
- Medium temperature limits-20 °C to 65.6 °C
- Ambient temperature limits-20 °C to 65.6 °C
Opis
SSi supplies flow measurement and control technology built for the harshest industrial environments. The eFlo 2.0 HiPr is the high pressure and liquid version of the eFlo line, monitoring and controlling flows that the standard low pressure meter cannot handle, while keeping the same digital display, touch pad interface and simple retrofit into existing control systems.
The meter is available in several configurations: with a motorised automatic control valve, with a manual control valve, without a control valve, and as a totaliser only. Depending on the model ordered, eFlo offers direct and remote setpoint control with built-in alarms, Modbus communications, digital and analogue I/O, USB and Ethernet connectivity, onboard datalogging and mobile device support.
SCADA integration reports current flow, totalised flow, setpoint and cost calculation, and the flow calibration can be certified in use to meet CQI-9 requirements.
Dane techniczne
| Power required | 24 V DC at 400 mA |
|---|---|
| Accuracy | ±4% |
| Turndown ratio | 6:1 |
| Medium temperature limits | -20 °C to 65.6 °C |
| Ambient temperature limits | -20 °C to 65.6 °C |
| Flow output signal (linear) | 4-20 mA |
| Max. output signal load | 500 Ω |
| Input control signal (linear) | 4-20 mA |
| Response time | 1 to 10 seconds |
| Communications | RS485, Ethernet, USB |
| Communications protocol | Modbus RTU, Modbus TCP, EtherNet/IP |
| Flow meter pressure limit | 4.4 bar max. (liquids), 6.5 bar max. (gases) |
| Pipe fitting | 1/2 in NPT |
Applications
It works where the atmosphere decides the quality of the case
The probe measures and controls the carbon potential in controlled atmospheres, whatever the furnace design.
Furnace types
01High pressure gas lines in heat treatment plants
02Liquid flow measurement, including aggressive media
03Carburising and nitriding installations
04Endothermic gas generators
05Sintering
Enquiry
Ask about this product
Enquiry sent
We reply within one working day, with a configuration and a quotation.
From the same group
Whole groupeFlo mass flow
eFlo Mass Flow Meter
Measures and controls the mass flow rate of gases and liquids in industrial and commercial applications where accuracy is critical.
eFlo Inline
eFlo Inline Meter
Displays current and totalised gas flow and retrofits easily into existing flow measuring equipment and control systems.